Przejdź do głównej zawartości

Jak wyodrębnić ciąg między dwoma różnymi znakami w programie Excel?

Jeśli masz listę ciągów w programie Excel, które musisz wyodrębnić część ciągu między dwoma znakami z pokazanego poniżej zrzutu ekranu, jak sobie z tym poradzić tak szybko, jak to możliwe? Tutaj przedstawiam kilka metod rozwiązywania tej pracy.

Wyodrębnij ciąg części między dwoma różnymi znakami za pomocą formuł

Wyodrębnij ciąg części między dwoma takimi samymi znakami za pomocą formuł

Wyodrębnij ciąg części między dwoma znakami za pomocą Kutools for Exceldobry pomysł 3


Wyodrębnij ciąg części między dwoma różnymi znakami za pomocą formuł

Aby wyodrębnić ciąg części między dwoma różnymi znakami, możesz wykonać następujące czynności:

Wybierz komórkę, w której umieścisz wynik, wpisz tę formułę =MID(LEFT(A1,FIND(">",A1)-1),FIND("<",A1)+1,LEN(A1))i naciśnij Enter klawisz.
doc wyodrębnia ciąg między dwoma znakami 1

Note: A1 to komórka tekstowa, > i < to dwa znaki, między którymi chcesz wyodrębnić ciąg.


Wyodrębnij ciąg części między dwoma takimi samymi znakami za pomocą formuł

Jeśli chcesz wyodrębnić ciąg części między dwoma takimi samymi znakami, możesz zrobić to:

Wybierz komórkę, w której umieścisz wynik, wpisz tę formułę =SUBSTITUTE(MID(SUBSTITUTE("/" & A3&REPT(" ",6),"/",REPT(",",255)),2*255,255),",","")i naciśnij Enter klawisz.
doc wyodrębnia ciąg między dwoma znakami 2

Uwaga: A3 to komórka tekstowa, / to znak, z którego chcesz wyodrębnić.

Wyodrębnij ciąg części między dwoma znakami za pomocą Kutools for Excel

Jeśli Kutools for Excel, możesz również wyodrębnić ciąg części między dwoma tekstami.

Kutools dla programu Excel, ponad 300 przydatne funkcje, ułatwiają pracę. 

Po zainstalowaniu Kutools dla programu Excel, wykonaj poniższe czynności:(Bezpłatne pobieranie Kutools dla programu Excel teraz!)

1. Wybierz komórkę, w której zostanie umieszczony wyodrębniony ciąg, a następnie kliknij Kutools > Formuła > Pomocnik formuły.
doc wyodrębnia ciąg między dwoma znakami 3

2. w Pomocnik formuły okno dialogowe, .check FILTRY pole wyboru, a następnie wpisz "dawny" w polu tekstowym wszystkie formuły dotyczące wyodrębniania będą wymienione w Wybierz formułę Sekcja, wybierz Wyodrębnij ciągi między określonym tekstem, a następnie w prawo Wprowadzanie argumentów wybierz komórkę, z której chcesz wyodrębnić podciąg Komórka, a następnie wpisz dwa teksty, między którymi chcesz wyodrębnić.
doc kutools wyodrębnia ciąg między dwoma tekstami 2

3. kliknij Ok, to podciąg między dwoma określonymi tekstami został wyodrębniony, przeciągnij uchwyt wypełniania w dół, aby wyodrębnić podciąg z każdej komórki poniżej.
doc kutools wyodrębnia ciąg między dwoma tekstami 3

doc kutools wyodrębnia ciąg między dwoma tekstami 4

Najlepsze narzędzia biurowe

🤖 Pomocnik AI Kutools: Zrewolucjonizuj analizę danych w oparciu o: Inteligentne wykonanie   |  Wygeneruj kod  |  Twórz niestandardowe formuły  |  Analizuj dane i generuj wykresy  |  Wywołaj funkcje Kutools...
Popularne funkcje: Znajdź, wyróżnij lub zidentyfikuj duplikaty   |  Usuń puste wiersze   |  Łącz kolumny lub komórki bez utraty danych   |   Okrągły bez wzoru ...
Super wyszukiwanie: Wiele kryteriów VLookup    Wiele wartości VLookup  |   Przeglądanie pionowe na wielu arkuszach   |   Wyszukiwanie rozmyte ....
Zaawansowana lista rozwijana: Szybko twórz listę rozwijaną   |  Zależna lista rozwijana   |  Lista rozwijana wielokrotnego wyboru ....
Menedżer kolumn: Dodaj określoną liczbę kolumn  |  Przesuń kolumny  |  Przełącz stan widoczności ukrytych kolumn  |  Porównaj zakresy i kolumny ...
Polecane funkcje: Fokus siatki   |  Widok projektu   |   Duży pasek formuły    Menedżer skoroszytów i arkuszy   |  Biblioteka zasobów (Automatyczny tekst)   |  Selektor dat   |  Połącz arkusze   |  Szyfruj/odszyfruj komórki    Wysyłaj e-maile według listy   |  Super filtr   |   Specjalny filtr (filtruj pogrubienie/kursywa/przekreślenie...) ...
15 najlepszych zestawów narzędzi12 Tekst Tools (Dodaj tekst, Usuń znaki, ...)   |   50 + Wykres rodzaje (Wykres Gantta, ...)   |   40+ Praktyczne Wzory (Oblicz wiek na podstawie urodzin, ...)   |   19 Wprowadzenie Tools (Wstaw kod QR, Wstaw obraz ze ścieżki, ...)   |   12 Konwersja Tools (Liczby na słowa, Przeliczanie walut, ...)   |   7 Połącz i podziel Tools (Zaawansowane wiersze łączenia, Podział komórki, ...)   |   ... i więcej

Zwiększ swoje umiejętności Excela dzięki Kutools for Excel i doświadcz wydajności jak nigdy dotąd. Kutools dla programu Excel oferuje ponad 300 zaawansowanych funkcji zwiększających produktywność i oszczędzających czas.  Kliknij tutaj, aby uzyskać funkcję, której najbardziej potrzebujesz...

Opis


Karta Office wprowadza interfejs z zakładkami do pakietu Office i znacznie ułatwia pracę

  • Włącz edycję i czytanie na kartach w programach Word, Excel, PowerPoint, Publisher, Access, Visio i Project.
  • Otwieraj i twórz wiele dokumentów w nowych kartach tego samego okna, a nie w nowych oknach.
  • Zwiększa produktywność o 50% i redukuje setki kliknięć myszką każdego dnia!
Comments (35)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Bonjour,

je souhaite extraire de ce texte (USD) 934.915765 (30-11-2022) le numero 934.915765, ce que je souhaite c'est faire un extrait de tout ce qui est entre (USD) et (30-11-2022)
This comment was minimized by the moderator on the site
Hi, please try this formula:
=LEFT((MID(I1,FIND(" ",I1)+1,256)),FIND(" ",(MID(I1,FIND(" ",I1)+1,256)),1)-1)
I1 is the cell that you want to extract number.
This comment was minimized by the moderator on the site
Hi, try this formula please:
=IFERROR(MID(A1,FIND("CG",A1),11),IFERROR(MID(A1,FIND("CP",A1),11),IFERROR(MID(A1,FIND("CV",A1),11),IFERROR(MID(A1,FIND("CD",A1),11),IFERROR(MID(A1,FIND("CC",A1),11),MID(A1,FIND("CO",A1),11))))))

If there is no match string, it returns #VALUE! error.
This comment was minimized by the moderator on the site
Hello, can you please help me with extracting a code from a cell? The code is always 11 characters long and it can start with either CC, CP, CV, CO, CG or CD. If it helps, it also ends with a number always. The code does not have a fixed position, it can be in the beginning, middle or end.
I tried this formula =MID(A2,FIND("CP",A2),11) but, as you see, it only finds the ones starting with CP.

An example of what the cell might contain is:
Text text CG1234dh201 text 123 text

Thank you!
This comment was minimized by the moderator on the site
Hi, I have an issue which i am struggling to solve. So I have a number of answers and i want to separate into separate cells.

i.e. A: XYZ|B*: SDR|C: AQS|

I can separate but my issue is there loads of line with the asterisk moving to the correct answer for each question. How do i get my head around this?

I am currently using the below formula

=MID(A5,SEARCH("A:",cell ref)+2,SEARCH("|",A5)-SEARCH(":",cell ref)-1)
This comment was minimized by the moderator on the site
Hi, Mohannmed Faisal, from my understanding, your question is to extract XYZ, SDR and AQS separately into three cells. If so, please use formulas below separately:
=MID(A7,SEARCH("A:",A7)+3,3)
=MID(A7,SEARCH("B*:",A7)+4,3)
=MID(A7,SEARCH("|C:",A7)+4,3)
A7 is the cell that you use to extract.
Hope it help you.
This comment was minimized by the moderator on the site
Bonjour,

J'ai un texte AAMMJJ que je souhaite transformer en JJMMAAAA
This comment was minimized by the moderator on the site
Hi, GG, try this formula =TEXTE(date; "jj/mm/aaaa")
This comment was minimized by the moderator on the site
Hi How to get specific value from description like
Desc: Date: 2022-07-22 23:59:51 Node: VA10TWPSQL026 Type: TSM SM_SERVER_EVENT 2579 Resource: 1700 Message Key: TSM_VA10TWPSQL026

I want to get node value as VA10TWPSQL026
This comment was minimized by the moderator on the site
Hi, Sandhya, if the node value always has a fixed length (14-chars), you can try this formula: =MID(A1,SEARCH("Node",A1)+5,14) hope it do a favor for you.
This comment was minimized by the moderator on the site
Hola,

Me encantan tus foros.

Me podrias ayudar con esto?

Tengo una serie de columnas asi:

U CALIPER R/H/R 1J0615424H Es
N DOOR WINDOW SWITCH R/H/F 8E0959851D5PR Ebbett Audi
N TAILIGHT L/H - LENS & BODY - ON QTR - W/XENON H/LAMP 63217217311 Coombes Johnson European Ltd
U*GUARD R/H/F - REPLACE RET NUT ALSO 5G0821106A (V) Private Purchase

Lo que necesito extraer es el numero de parte de cada celda pero siempre esta en una posicion diferente, por ejemplo de la primer celda necesito solo 1J0615424H, de la segunda necesito extraer 8E0959851D5PR, de la tercera 63217217311 y de la ultima 5G0821106A

Muchas gracias

Anderson
This comment was minimized by the moderator on the site
Hallo,

Ik moet een stuk tekst extraheren uit een cel, maar kom er niet aan uit.

51420647 Ondersteuner Kringdirectie (Unfilled)
P_00040501 Productmanager Wendbare Pool Bedrijven (Unfilled)

De tekst die ik nodig heb ik is het middelste deel tussen de cijfers en (unfilled).
Welke formuler kan ik hiervoor gebruiken?
This comment was minimized by the moderator on the site
HelloI have an issue where I am trying to extract a number from a set of text and numbers in excel. This is an excerpt from the data I have:AUS23-7W
GER490-8W
MEX114-2M
MEX444-5M
MEX331-3W
US118-15W
ARG572-16W
Japan122-6W
Japan526-13W
ARG585-7W
Japan398-16W
Japan320-15W
ARG141-3Mo
Canada329-5W
US421-17Mo
Canada427-14W
I need to be able to extract just the number to the right of the dash. For example, I need Japan320-15W to return just the 15 in its own column. Is there a formula you could provide me with that can accomplish this? Many thanks!

This comment was minimized by the moderator on the site
Hello, Duggled, to solve your job, just need two steps. Firstly, select the text strings, and apply Text to Columns under Data tab, choose Delimited > Other, and type - into the textbox beside Other option, click Finish. In this step, your data has been split into two columns by deliliter -. Secondly, use the formula  =SUMPRODUCT(MID(0&B1, LARGE(INDEX(ISNUMBER(--MID(B1, ROW(INDIRECT("1:"&LEN(B1))), 1)) * ROW(INDIRECT("1:"&LEN(B1))), 0), ROW(INDIRECT("1:"&LEN(B1))))+1, 1) * 10^ROW(INDIRECT("1:"&LEN(B1)))/10)(A1 is the cell that you want to extract the number from, here you change it to your second column cell)then the numbers after - have been extracted. Or in the second step, you can apply VBA, or our handy tool, for more details, please visit:https://www.extendoffice.com/documents/excel/1622-excel-extract-number-from-string.html
This comment was minimized by the moderator on the site
This formula works well for pretty much everything except these data :MEX114-2M
MEX444-5M
MEX373-15M
MEX540-8M
MEX396-11M
MEX386-10M
MEX369-14M
MEX446-3M
MEX75-12M
MEX372-3M
MEX178-6M
MEX510-7M
MEX361-17M
MEX501-13M
MEX221-17M
Is there any way you could revise that formula to include these? Thank you so much!
This comment was minimized by the moderator on the site
Hi! Sorry if I reposted this and thank you so much for the formula.
But I'm not sure how to do this, I have this in a cell:

random comment;24/nov/21 2:34 PM;random ID;3240

and I need to get in separate cells the date without the hour, like 24/nov/21 . And, in another cell, the last numer; in this case 3240 (The format is alway the same, and the date is always 9 characters long, the only thing that might change is the last number, as is the number of seconds it took to do something)

How should I do it?
Thank you!! 
This comment was minimized by the moderator on the site
Hi, to extract date, please use formula =MID(A1,16,9), A1 is the cell that the original data places, to extract ID number, please use formula =MID(A1,44,10),, for more details, you can refer to this articel https://www.extendoffice.com/documents/excel/3639-excel-extract-part-of-string.html
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations